Canon imageRUNNER ADVANCE 8105 Getting Started page 118

7
Set a recipient address using the control panel .
Sample recipient setting:
•
Server side settings:
[Full Computer Name]: starfish.organization.company.com
Create a directory named "share" in the specified FTP server's home directory "\lnetpub\ftproot", and
then set "share" as the data destination.
•
The machine's recipient settings:
<Protocol>:
[Host Name]: starfish.organization.company.com
[Folder Path]: share
[User]:
4
[Password]:
•
To use [Full computer name], which was confirmed in step 4, as the host name for [Host Name] as shown in the above example, it is
necessary to use a DNS server. (This applies even if the machine and the FTP server are in the same subnet.) If no DNS server is available,
the host name setting should be specified using the IP address of the FTP server.
•
Up to 128 alphanumeric characters can be entered for [Host Name] on the control panel. Also, up to 255 alphanumeric characters can
be entered for [Folder Path].
•
If you switch the language of the touch panel display, [Host Name] and [Folder Path] may not be displayed correctly.
•
If you want to send to an IPv4 host using an FTP port other than port 21, set [Host Name] using the following format:
<IPv4 address of FTP server>:<Port number>
Example: 192.168.1.21:21000
•
To send to an IPv6 host, set [Host Name] using the following format:
<IPv6 address>:<Port number>
Example: [5aed:90a0:bc05:01d2:568a:2fc0:0001:12ee]:21000
4-32
Setting Up a Computer as a File Server
FTP
User name entered in step 5
Password for the above user