Installing the System Options Using the Touch Panel Display
You can install the system options to the machine by registering the license key using the touch panel display.
To perform the procedures described in this section, you must log in to the machine as an administrator. (See "Logging In from the Touch Panel
Display, " on p. 1-22.)
1
Press
(Settings/Registration) → [Management Settings] → [License/Other] → [Register License] .
2
Enter the license key using
[ ][ ]:Press to move the cursor.
[Backspace]: Press when you entered a wrong number. The number in front of the cursor is deleted and you can reenter the correct
number.
If the message <The value of the license key is incorrect. Check the license key.> is displayed, press [OK] → enter the correct license key.
If the message <The feature required for installation is not present.> is displayed, you cannot register the license key. Press [OK] → cancel
the registration.
3
Press [OK] .
The registered functions can be used only after you restart the machine.
-
(numeric keys) → press [Start] .
Installing by Not Connecting this Machine to an Outside Network
9
9-13