Canon imageRUNNER ADVANCE 8105 Getting Started page 178

Updating the Firmware
Using the "Register/Update Software" function, you can update the firmware of the machine to the most recent version. You can
use this function from the computer (Remote UI).
•
Multiple users cannot use the "Register/Update Software" function at the same time.
•
If another user is logged in to SMS (Service Management Service), you cannot use the "Register/Update Software" function from the Remote UI.
•
If the following procedure is performed, you cannot use the "Register/Update Software" function from the Remote UI for a specified time:
- when Remote Login Service of the SMS is set and the Web browser was closed without pressing [To Portal] or [Log Out]
- when Remote Login Service of the SMS is not set and the Web browser was closed without pressing [To Portal]
- when the Web browser was closed without pressing [Log Out from SMS], [To Remote UI], or [Log Out] of the SMS
•
For more information on SMS, see e-Manual > MEAP.
You can update the firmware using the data that is distributed separately from the machine.
Obtaining the Firmware
10
10-2
Updating the Firmware
Registering the Firmware from the Remote UI
Updating the
Firmware