Canon imageRUNNER ADVANCE 8105 Getting Started page 78

Settings specified from the control panel become effective after the machine is restarted, after the procedure. Turn OFF the machine, wait at
least 10 seconds, and then turn it ON. (See Chapter 1, "Before You Start Using This Machine." )
•
System Manager Information (System Manager Department ID/System Manager PIN) is set by default in the machine. As a result, administrators
are required to enter a system manager department ID and system manager PIN in the Settings/Registration screen to log in. The default
settings for the system manager department ID and system manager PIN are both "7654321". These should be changed to more suitable values.
For more information on the system manager department ID and PIN, see e-Manual > Security.
•
For instructions on how to turn ON/OFF the machine, See Chapter 1, "Before You Start Using This Machine."
3
3-6
Touch Panel Display Transition