Table of Contents
Advertisement
6.
Press F6 while the message "Setup is inspecting your computer's hardware
configuration..." is displayed at the top of the screen.
NOTES:
In this status, pressing F6 cannot change the screen display at all.
Conduct key entries when the access lamp on the USB floppy disk
drive is off (or access to the floppy disk does not occur).
7.
When the following message appears, press S.
Setup could not determine the type of one or more mass storage
devices installed in your system, or you have chosen to
manually specify an adapter. Currently, Setup will load
support for the following mass storage devices.
The following message appears.
manufacturer-supplied hardware support disk
8.
Insert Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER into the floppy
disk drive and select [Adaptec Ultra320 SCSI Cards(Win XP/Server 2003 IA-32)].
The following message appears.
The driver you provided seems to be newer than the Windows
default driver.
Windows already has a driver that you can use for
"Adaptec Ultra320 SCSI Cards(Win XP/Server 2003 IA-32)".
Unless the device manufacture prefers that you use the driver on the
floppy disk,you should use the driver in Windows.
9.
Press S.
IMPORTANT:
be installed.
10.
Press S if the Adaptec HostRAID is used.
If the Adaptec HostRAID is not used, go to Step 13.
11.
Insert the "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the
floppy disk drive and press Enter.
A list of SCSI adapters is displayed.
12.
Select "Adaptec HostRAID U320 Driver Ver1.02 For Windows 2000/XP/2003" and press
Enter.
Please insert the disk labeled
into Drive A:
* Press ENTER when ready.
Do not press Enter here, or the proper driver will not
77
Advertisement
Table of Contents
