Keep this User's Guide at hand for quick reference at anytime necessary.
Follow the safety instructions in this User's Guide when using the blade assembly unit.
The blade assembly unit contains potentially dangerous components, and ignoring warnings may
cause hazards (which can be prevented).
The components with possible danger are indicated with a warning label placed on or around them
as well as described in this User's Guide.
In the User's Guide or on the warning labels, "WARNING" or "CAUTION" is used to indicate a degree
of danger. These terms are defined as follows:
Precautions and notices against hazards are presented with one of the following three symbols. The
individual symbols are defined as follows:
This symbol indicates the presence of a hazard if the instruction is ignored.
An image in the symbol illustrates the hazard type. (Attention)
This symbol indicates prohibited actions. An image in the symbol illustrates a
particular prohibited action. (Prohibited Action)
This symbol indicates mandatory actions. An image in the symbol illustrates a
mandatory action to avoid a particular hazard. (Mandatory Action)
Symbol indicating a prohibited
action (may not always be
Indicates the presence of a hazard that may result in death or serious
personal injury if the instruction is ignored.
Indicates the presence of a hazard that may cause minor personal injury,
including burns, or property damage if the instruction is ignored.
Symbol to draw attention
Immediately after the server is powered off, its internal components such as
hard disk drives are very hot. Leave the server until its internal components
fully cool down before installing/removing any component.
Term indicating a degree of danger
Description of a danger