Table of Contents
Advertisement
54
1.
Remove the front bezel if it is installed.
2.
Turn the two thumbscrews counterclockwise to unlock the front fan unit.
Unlock
3.
Hold the front fan unit securely when you remove it from the unit.
IMPORTANT:
air left in the chassis or exhausted from the fans may be at a high
temperature.
4.
See "Additional Slot" to confirm the slot on which the hard disk drive is to be installed.
IMPORTANT:
corresponding to the slot number from the slot number labels coming
with the hard disk drive and put the label on the tray handle. Keep the
remaining labels carefully because they may be necessary when
changing the configuration. For custom installation model, the label
indicating the SCSI ID only (like "-0") is attached to the tray handle.
Fill the slot number to install the hard disk drive.
[Slot number label] coming with hard disk drive
6-1
Lock
Note that the fans may be rotating. Also note that the
Before the hard disk drive is installed, peel the label
8
6-0
5-1
5-0
4-1
4-0
3-1
3-0
Screws
7
6
5
4
3
2
1
KVM
Modia
2-1
2-0
1-1
1-0
Advertisement
Table of Contents
