Download Print this page

NEC N8405-013F User Manual page 61

Express5800/bladeserver series
Hide thumbs

Advertisement

10.
Connect the CPU123 connector of BLADE switching cable A to CPU BLADE 1-2-3
connector of the intelligent switch (L2), CPU456 connector to CPU BLADE 4-5-6, and
KVM cable to KVM connector when:
– only one intelligent switch (L2) is installed in the blade assembly unit
– to use the installed intelligent switch (L2) as a master of management function.
Do not connect the BLADE switching cable A/B and KVM cable to the intelligent
switch (L2) which is used as a slave of management function. (CPU1, CPU2, CPU3
connectors of BLADE switching cable A are to be connected to CPU blades in slot 1, 2,
and 3, respectively. CPU4, CPU5, CPU6 connectors of BLADE switching cable B are to
be connected to CPU blades in slot 4, 5, and 6, respectively.)
See "Connection" described later for details.
IMPORTANT:
Select, Media Select, and Serial Select functions. Connect the BLADE
switching cable A/B and KVM cable to the intelligent switch (L2) in
the slot of which Master/Slave lamp is lit, because that intelligent
switch carries the management function. For more information, refer to
the User's Guide of intelligent switch (L2).
The intelligent switch (L2) also manages the KVM
49

Advertisement

loading

  Related Manuals for NEC N8405-013F