Download Print this page

Jobs To Perform After Installation - NEC N8405-013F User Manual

Express5800/bladeserver series
Hide thumbs

Advertisement

6.
Select "NEC USB FDD Windows 2000" and press Enter.
7.
Press S again.
8.
Insert Windows 2000 OEM-DISK for NEC EXPRESSBUILDER into the floppy disk
drive and press Enter.
The list of SCSI adapters appears.
9.
Select the [Adaptec Ultra320 SCSI Cards (Win2000)] and press Enter.
10.
If the Adaptec HostRAID is installed, press S.
If the Adaptec HostRAID is not installed, go to step 13.
11.
Insert Windows 2000 OEM-DISK for NEC EXPRESSBUILDER into the floppy disk
drive and press Enter.
The list of SCSI adapters appears.
12.
Select [Adaptec HostRAID U320 Driver Ver 1.02 For Windows 2000/XP/2003] and press
Enter.
13.
Press Enter.
Then continue the proper jobs following the on-screen instructions. Refer to the "First Step Guide"
for details of the installation.
After the files have been copied, the system restarts automatically. Then provide the setup following
the on-screen instructions. Refer to the "First Step Guide" for details.
Once the installation is complete, go to "Jobs to Perform after Installation".

Jobs to Perform after Installation

Once the installation is completed, perform the following jobs to complete the setup according to
the User's Guide of the CPU Blade.
System update
Detailed driver setting
Setup for fault processing
System information backup
Installation of terminal service (if required)
When the above jobs are complete, perform the "Installation of Driver for Internal Floppy Disk
Drive of N8405-013F" described below.
79

Advertisement

loading

  Related Manuals for NEC N8405-013F