Table of Contents
Advertisement
32
Check the Mounting Hardware
Prepare the following parts:
One rail bracket (L) (shipped with the blade assembly unit)
One rail bracket (R) (shipped with the blade assembly unit)
12 M5 screws (shipped with the blade assembly unit)
8 M5 washers (shipped with the blade assembly unit)
4 core nuts (shipped with the rack assembly)
Template (shipped with the blade assembly unit)
NOTE:
shape. See the figure on page 37 to check the direction and position at
which each bracket is installed.
Required Tools
The tools required to install the blade assembly unit on the rack include Phillips and flat head
drivers.
The rail brackets (L) and (R) are different from each other in
Advertisement
Table of Contents
