The front bezel is the security cover covering the front face of the blade assembly unit; it prevents
the blade assembly unit from being pulled out from the rack unless the front bezel has first been
removed. Remove the front bezel to pull the blade assembly unit out of the rack or to install or
remove a hard disk drive.
released by the attached security key.
Push the right side of the bezel to the blade assembly unit while keeping the tab at the left end of the
front bezel on the frame of the blade assembly unit. The installation is secure when a click occurs.
After the installation, lock the front bezel with the key for security.
The front bezel cannot be removed unless the lock is