NEC N8405-013F User Manual page 67

Express5800/bladeserver series
Hide thumbs

Advertisement

Table of Contents
5.
If a dummy tray is installed on the slot on which the hard disk drive is to be installed,
remove the dummy tray.
IMPORTANT:
6.
Release the lock of the lever on the hard disk drive to make the lever opened.
7.
Hold the hard disk drive so that the BP connector faces the blade assembly unit and the
lever on the front of the drive carrier faces the top.
8.
Open the lever of the hard disk drive.
Keep the removed dummy tray for future use.
55

Advertisement

Table of Contents
loading

  Related Manuals for NEC N8405-013F

Table of Contents