House Code; Ha Control - Electronics Line Infinite Prime Installation Manual

11.3: House Code

The House code is part of the identification code of each HA unit. For the Home
Automation features to function correctly, the House code on each HA unit must be
identical to the House code programmed in the system's memory.
To program the system House code:
1. From the Programming menu, select HA Programming, House Code [962].
2. Using the arrow keys, select a House code from the options available (A-P).

11.4: HA Control

The HA Control option allows you to enable or disable all Home Automation features for
the entire system.
To program the Home Automation setting:
1. From the Programming menu, select System Options, HA Control [963].
2. Select Enabled or Disabled.
Note: PGM output is not affected by HA Control parameter. Remote activation
of PGM is possible, even when HA control is disabled, as long as the PGM
output trigger is defined as Telecontrol – see 9.7.1: Output Trigger).
-83-