Tones Options - Electronics Line Infinite Prime Installation Manual

To program the Fire Trouble Tones option:
1. From the Programming menu, select Tones, Fire Trb. Tones [938].
2. Select Enabled or Disabled.
It is not necessary to program the Telephone Trouble Tones and Fire Trouble Tones
options if the Trouble Tones option is programmed as disabled.

8.9: Tones Options

8.9.1: Tones Output
The Tones Output option enables you to determine whether the tones sounded when arming
and disarming are sounded by the control system's built-in siren or its built-in speaker.
To program the Tones Output option:
1. From the Programming menu, select Tones, Tones Options, Tones Output [9391].
2. Select Siren or Speaker.
8.9.2: Speaker Volume
The Speaker Volume option determines the volume level of the tones sounded by the speaker.
To program the Speaker Volume option:
1. From the Programming menu, select Tones, Tones Options, Speaker Vol. [9392].
2. Select High or Low.
It is not necessary to program the Speaker Volume option if "Siren" is selected for the
Tones Output option.
8.9.3: Keypad Selection
The Keypad Selection feature enables you to enable or disable tones sounded by
hardwire LCD keypads.
To program the Keypad Selection option:
1. From the Programming menu, select Tones, Tones Options, Keypad Sel. [9393].
2. Use the 1, 2, 3 and 4 keys to toggle keypad tones on or off for each keypad. If the
number of the keypad appears on the display, tones will be sounded from that keypad.
3. Press when the desired setting is displayed.
You must enable keypad tones for at least one keypad.
-56-