This manual is designed to help you install the infinite prime control system. We strongly
urge you to read through this manual, in its entirety, before beginning the installation
process so that you can best understand all that this security system has to offer. This
manual is not intended for end user use. End users are encouraged to read the user manual
provided with the system. If you have any questions concerning any of the procedures
described in this manual please contact Electronics Line 3000 Ltd. at (+972-3) 918-1333.
1.1: Documentation Conventions
Throughout the manual, we have tried to include all of the operating and programming
functions using a similar structure and order as they appear in the menu. A detailed
explanation of how to navigate the control system's menu is included in section 4.1:
Menu Navigation. In order to simplify the procedures that appear in the rest of this
manual, the following conventions are used:
This...
Select...
From the Event Log Menu,
select Clear Log.
From the Service menu, select
Time/Date, Set Date.
[7012]
[#5]
5. Interface Test
Table 1.1: Documentation Conventions
Chapter One: Introduction
Means...
Use the arrow keys to scroll through the options and press
Enter the main menu by pressing
code. Using the arrow keys, navigate until you reach Event
Log and press
. Using the arrow keys, navigate until you
reach Clear Log and press
The same as above only this time you are navigating through
three menu levels.
The shortcut to a specific menu item from the main menu. In
this case, this is the shortcut for Set Date. These appear in
the procedures as an additional aid to menu navigation.
A shortcut to a specific item in a sub-menu. For example, [#5] is
the shortcut to Bell enable disable in the sub-menu that is opened
once you have selected the sensor you want to program.
The symbol on a key that appears on the keypad
The text that actually appears on the LCD display (bold italics).
Important note, please pay attention.
-5-
and entering your user
.
.
Need help?
Do you have a question about the Infinite Prime and is the answer not in the manual?
Questions and answers