Table of Contents
Advertisement
10.3 Virtual Server
Configure Virtual Server, go to: Network >> NAT >> Public Accessible Server.
This function allows the administrator to set 80 virtual servers at most, so that client devices outside the
managed network can access these servers within the managed network. Different virtual servers can be
configured for different sets of physical services, such as TCP and UDP services in general. Enter the "External
Service Port", "Local Server IP Address" and "Local Server Port". Select "TCP" or "UDP" for the service's
type. In the Enable column, check the desired server to enable. These settings will become effective
immediately after clicking the Apply button.
152
Advertisement
Table of Contents
