Table of Contents
Advertisement
5.2.2 Setup Wizard
The administrator can configure the WHG305 via its web management interface as specified. In order to connect to
the Internet, System's outbound TCP/IP related information such as IP address, subnet mask, and gateway address,
must first be obtained from your ISP. The Configuration Wizard uses four simple steps to provide easy setup of the
WHG305.
General
WAN1 Interface
Local User Account (Optional)
Confirm and Restart
The Setup Wizard is aimed to provide express setup procedures for WHG305. Follow the instructions given at each
step to change the system admin password, select time zone, configure WAN1 interface, and create local user
account. Upon completing the Setup Wizard procedures, the system needs to be restarted to have the setting take
effect. The system is ready for operation after restart with minimal configurations.
Running the Wizard
Click Setup Wizard button from the Home page and the Setup Wizard page will appear.
Please read the recommendation of each step.
14
Advertisement
Table of Contents
