5.2.2 Routing
Specific Route Profile: Click the button of Setting for Specific Route Profile, the Specific Route Profile
list will appear.
8.4..1
Specific Route
Specific Route Profile: The Specific Route is use to control clients to access some specific IP segment by
the specified gateway.
Destination / IP Address: The destination network address or IP address of the destination host.
o
Please note that, if applicable, the system will calculate and display the appropriate value based on the
combination of Network/IP Address and Subnet Mask that are just entered and applied.
Destination / Subnet Netmask: The subnet mask of the destination network. Select
o
255.255.255.255(/32) if the destination is a single host.
Gateway / IP Address: The IP address of the gateway or next router to the destination.
o
8.4..2
Default Gateway
Default Gateway: The default gateway of WAN1, WAN2, or a desired IP address can be defined in each
Policy except Global Policy. When Specific Default Route is enabled, all clients applied with this Policy will
access the Internet through this default gateway.
130