Table of Contents
Advertisement
6.5 Manually add AP
To add an AP Manually, go to: Access Points >> Enter Local Area AP Management >> Adding.
The AP can also be added manually without being online. Input the related data of the AP and select a Template.
After clicking Add, the AP will be added to the managed list.
AP Type: The model type of the AP for adding to the List.
AP Name: Mnemonic name of the specific AP.
Admin Password: Password required for this AP.
IP Address: IP address of the specified AP.
MAC Address: MAC address of the specific AP.
Remark: Some extra information to be filled in for this AP if desired.
Service Zone (Tag-Based only): This item is only shown when Tag-Based mode is selected in System
Configuration >> LAN Port Mapping. Select the name of Service Zone such as Default, SZ7, etc.. And it is
only for Multi-VAP AP only.
Template Applied: The template which will be applied to the added AP.
Channel: The selected channel will be applied to the added AP.
93
Advertisement
Table of Contents
