Table of Contents
Advertisement
6.3 Configure AP Template
Configure AP Template, go to: Access Points >> Enter Local Area AP Management >> Templates.
Template are configuration profiles for AP models that can be copied to managed AP thereby avoiding the task of
having to configure each managed AP individually. There are three templates provided for each AP model. Select an
AP Type, and click Edit to proceed with its template configuration.
Input the template Name and Remark for easy reference and memorization. An easy way to configure a template is
to copy the configuration of an already configured AP to the template. Select the desired AP from Copy Setting's
From list and click apply to copy the selected AP's configuration to the template.
If copy is not desired, please select NONE then click the button of Configure to proceed with manual template
configuration.
Template Editing: This page allows the administrator to configure template name, template source, and
template remark.
Name: The name shown for this particular template.
Copy Settings From: Select a pre-configured existing AP and click Apply to save its settings as
the template settings.
Remark: The remark or additional information for this template profile.
Template Configuration
To configure a template manually please click the Configure button.
87
Advertisement
Table of Contents
