Table of Contents
Advertisement
5.2.2 AP Background Discovery
Configure AP Background Discovery, go to: AP Management >> Enter Local Area AP Management >>
Discovery.
Background AP Discovery: Click Configure to enter Background AP Discovery interface and proceed with
related configuration.
The configuration is the same as AP Discovery. When Background AP Discovery function is enabled, the
system will scan once every 10 minutes or according to the time set by the administrator. If any AP is discovered
and Auto Adding AP to The List is enabled, it will be assigned an available IP from the starting IP address set
in checked Service Zone profile and applied with the selected template. You can also set the channel of the AP
would use.
The scanning process may take a long time if the IP range assigned to scan is too wide.
92
Advertisement
Table of Contents
