Table of Contents
Advertisement
3.4 Accessing Web Management Interface
WHG-505 supports web-based configuration. Upon the completion of hardware installation, WHG-505 can be
configured via web browsers with JavaScript enabled such as Internet Explorer version 6.0 and above or Firefox.
To access the web management interface, connect a PC to the Mgmt Port, and then launch a browse. Make sure
you have set DHCP in TCP/IP of your PC to get an IP address dynamically. On the other hand, you also can
access the web management interface from LAN1 or LAN2 port. However, the default gateway IP address will be
different to Mgmt port, the IP address will be the default gateway IP address of Default Service Zone.
Next, enter the gateway IP address of WHG-505 at the address field. The default gateway IP address from Mgmt
Port is"https://172.30.0.1" ("https" is used for a secured connection).
The administrator login page will appear. Enter "admin", the default username, and "admin", the default password,
in the User Name and Password fields. Click LOGIN to log in.
If your PC is connecting to the Mgmt port, and you can't get the Administrator's login screen, the reasons
may be:
(1) The PC is set incorrectly so that the PC can't obtain the IP address automatically from the Mgmt port;
(2) The IP address and the default gateway are not under the same network segment.
Please use default IP address such as 172.30.255.xx in your network and then try it again. For the
configuration on PC, please refer to Appendix A. Network Configuration on PC.
11
Advertisement
Table of Contents
