Table of Contents
Advertisement
7.3 Manually add AP
To add an individual Access Points to the managed list, go to: Access Points >> Enter Wide Area AP
Management >> Adding.
Besides Discovery feature that can search and list multiple APs for adding to the management list, Adding page
allows administrator to directly add a single Access Point to the management list. Simply configure the devices IP
address, name and login credentials, set a SNMP community string and click the Add button.
Device Type: Currently, Wide Area AP management only supports OWL800 APs.
Device IP: The IP address of the OWL800 AP to add to the management list.
Device Name: The mnemonic name given to this AP decvice.
Login ID: The Device's management interface login name.
Password: The Device's management interface login password.
SNMP Communtiy: The SNMP community string for this AP device can be configured here.
106
Advertisement
Table of Contents
