Remote Vpn - LevelOne WHG-505 User Manual

13.3 Remote VPN

Configure Remote VPN, go to: Network >> VPN >>Remote VPN.
WHG-505 support Remote VPN for user login to system from remote area. After the user is login to system from the
outside network of WAN, the user will feel that it is look like login to WHG-505 under the service zone locally. They
also can be applied Policy and are controlled by system to access the network.
All settings are look like the settings in Service Zone. It also can setup the SIP WAN Interface, Authentication
Options, Group Permission, Applied Policy and customizable Login Page.
After Remote VPN is enabled, when you browse the home page with the WAN IP, you will get the Remote VPN login
page, input the enabled authentication options username and password, then you will login success to system.
After Remote VPN is enabled, the default home page will be the Remove VPN login page. If you want to
access the WMI of WHG-505, please input "login.shtml" after the WAN IP. For example, it may be:
"http://10.2.3.4/login.shtnl"
207