Appendix K. Rogue AP Detection
Configure Rogue AP Detection, go to: Access Points >>Rogue AP Detection.
This function is designed to detect the non-managed or possibly malicious AP in the deployed environment. It
takes the managed AP as sensors to find out the non-managed AP even if the AP uses the same SSID with
the managed AP's. You can setup the Detection Interval, e.g. 5 minutes; system will detect the rogue AP for
every 5 minutes. All of the detected rogue AP will list in the Rogue AP List, it contain the AP's BSSID, ESSID,
Type, Channel, Encryption, and the detection time.
303