Reset The Settings/Reboot The Camera [Default Reset] - Panasonic WV-SFV311A Operating Instructions Manual

18 Maintenance of the camera [Maintenance]
Category
SD memory card <SD> Format
<SD> Format error
<SD> Write-protect ON
(Locked card)
<SD> Detection error
<SD> Write error
<SD> Read error
<SD> Delete error
<SD> File system error
<SD> Undefined error
IMPORTANT
•
In order to be able to correctly use this function, format the SD memory card with the camera before
using it.
•
When using SD memory cards that have been used on other devices such as PCs, the correct
information may not be able to be displayed.
•
Up to 30 SD memory card logs can be saved to the built-in memory of the camera. When the saved
system logs have reached the maximum number, the newer logs will overwrite the older system logs.
Note
•
Refer to our website (http://security.panasonic.com/support/info/) for further information about the
contents of the displayed statuses (relating to the "Viewnetcam.com" service, the UPnP function, or
the self check).
18.4 Reset the settings/Reboot the camera [Default
reset]
Click the [Default reset] tab of the "Maintenance" page. (®page 42, page 44)
The settings and the HTML data of the camera can be initialized and reboot of the camera can be performed
on this page.
196 Operating Instructions
Indication
Successfully formatted the SD memory card.
Error occurred when formatting the SD memory card.
A write-protected SD memory card is inserted.
The SD memory card could not be correctly recognized.
An error occurred when writing to the SD memory card.
An error occurred when reading from the SD memory card.
An error occurred when deleting data from the SD memory
card.
An error occurred in File system of the SD memory card.
An error other that the ones above has occurred for the SD
memory card.
Description