Installing And Removing 2.5" Hard Drives - Supero FatTwin F617R2-F73 User Manual

Installing and Removing 2.5" Hard Drives

Removing 2.5" Hard Drive Carriers from the Node
1. Press the release button on the drive carrier. This extends the drive bay
handle.
2. Use the handle to pull the drive carrier out of the chassis.
Figure 6-6: Removing a 2.5" Hard Drive Carrier
Note: Your nodes may vary from the one shown in the illustration.
1
2
1
1
6-7
Chapter 6: Advanced Chassis Setup