Table of Contents
Advertisement
5. Secure the riser card to the PCIE slot bracket using the two screws included
in the accessory box.
Figure 6-16: Installing the Riser Card and Bracket
6. Insert the riser card into the appropriate slot on the motherboard.
7. Simultaneously insert the expansion card into the riser card, while sliding the
expansion card bracket into the open PCIE slot.
8. Secure the expansion card bracket ot the PCIE slot bracket using two screws
as illustrated.
Figure 6-17: Installing the Expansion Card
Note: Your nodes may vary slightly from the ones shown in these illustrations.
Chapter 6: Advanced Chassis Setup
6-17
Bracket
Mounting
Screws
Advertisement
Table of Contents
