Table of Contents
Advertisement
FatTwin F617R2-FT/F73 USER'S MANUAL
Installing the Backplane
Installing the Backplane into the Chassis
1. Ensure that all of the hard drive carriers have been removed from the bays in
the front of the node (see Section 6-8).
2. Ease the backplane forward, against the front of the chassis.
3. Align the mounting holes in the backplane with the holes in the chassis.
Replace the two screws at the top of the backplane
Note: Your nodes may vary from the one shown in the illustration.
4. Reconnect all cables and return the hard drive trays to their bays in the front
of the node.
Figure 6-12: Installing the Backplane
6-12
1
2
Advertisement
Table of Contents
