Table of Contents
Advertisement
Connector
Description
COM1
Serial (COM) Port
FAN1/FAN2
CPU/System (4-Pin) Fan Headers
JFLED1
Remote Battery Holder
JIPMB1
4-pin External BMC I2C Header (for an IPMI Card)
JP3/JP4
4-pin Power Connectors
JP5
8-pin Power Connector
JSD1
SATA Device Power Connector
JSTBYI
Standby Power Connector
JTPM1
TPM (Trusted Platform Module)/Port 80
LAN1/LAN2
G-bit Ethernet LAN Ports 1/2
(IPMI) LAN
IPMI LAN
(I-)SATA 0/1
SATA 3.0 Connectors 0/1 from Intel AHCI
(I-) SATA 2-5
SATA 2.0 Connectors 2/3/4/5 from Intel AHCI
(L-) SAS 0/1/2/3
SAS Connectors 0/1/2/3 from LSI 2308 SAS Controller (X9DRFF-7 Only)
(L-) SAS 4-7
SAS Connections 4-7 from LSI 2308 SAS Controller (X9DRFF-7 Only)
6-SGPIO 1
Serial_Link General Purpose I/O Header for LSI SAS connection support
(X9DRFF-7 Only)
T-SGPIO 1/2
Serial_Link General Purpose I/O Headers 1/2 for Intel SATA connection support
(CPU1) Slot1/
PCI-Exp. 3.0 x16 Slots
(CPU2) Slot2
SWI
UID (Unit Identifer) Switch (SW1)
USB0/USB1
Backplane USB 0/ USB1 Ports
USB2
Front Panel USB 2 Port
VGA1
(Backplane) VGA Port
Note: To provide adequate power supply to the motherboard, be sure to connect
the 8-pin power connector (JP5) and the 4-pin power connectors (JP3/JP4) to the
power supply. Failure to do so might void the manufacturer warranty on your power
supply and motherboard.
Chapter 5: Advanced Motherboard Setup
5-15
Advertisement
Table of Contents
