Table of Contents
Advertisement
FatTwin F617R2-FT/F73 USER'S MANUAL
The WPCM450R communicates with onboard components via six SMBus
interfaces, PECI (Platform Environment Control Interface) buses, and General
Purpose I/O ports.
WPCM450R DDR2 Memory Interface
The WPCM450R supports a 16-bit DDR2 memory module with a speed of up to 220
MHz. For best signal integrity, the WPCM450R provides point-to-point connection.
WPCM450R PCI System Interface
The WPCM450R provides 32-bit, 33 MHz 3.3V PCI interface, which is compliant
with the PCI Local Bus Specifi cation Rev. 2.3. The PCI system interface connects
to the onboard PCI Bridge used by the graphics controller.
Other Features Supported by the WPCM BMC Controller
The WPCM450R supports the following features:
•
IPMI 2.0
•
Serial over LAN
•
KVM over LAN
•
LAN Alerting-SNMP Trap
•
Event Log
•
X-Bus parallel interface for I/O expansion
•
Multiple ADC inputs, Analog and Digital Video outputs
•
SPI Flash Host BIOS and fi rmware bootstrap program supported
•
Reduced Media Independent Interface (RMII)
•
OS (Operating System) Independency
•
Provides remote Hardware Health Monitoring via IPMI. Key features
•
Provides Network Management Security via remote access/console redirection.
•
Supports the following Management tools: IPMIView, CLI (Command Line
Interface)
•
RMCP+ protocol supported
Note: For more information on IPMI confi guration, please refer to the IPMI User's
Guide posted on our website at http://www.supermicro.com/support/manuals/.
1-4
Advertisement
Table of Contents
