Table of Contents
Advertisement
FatTwin F617R2-FT/F73 USER'S MANUAL
Removing 2.5" Hard Drive Carriers from the Node
1. Press the release button on the drive carrier. This extends the drive bay
handle.
2. Use the handle to pull the drive carrier out of the chassis.
Drive Carrier
The 2.5" hard drives are mounted in the drive carrier to simplify their installation
and removal from the chassis. These carriers also help promote proper airfl ow for
the drive bays.
Warning: Except for short periods of time while swapping hard drives, do not
operate the server with the hard drives bays empty.
Figure 6-8: Removing the Dummy Drive from the 2.5" Drive Carrier
Figure 6-7: 2.5" Hard Drive Carrier
1
1
1
1
6-8
1
1
1
1
Dummy Drive
Advertisement
Table of Contents
