Table of Contents
Advertisement
6-13 Removing and Installing System Fans
Removing and Installing External System Fans
Removing a Rear Exhaust Fan
1. Determine which node contains the failed fan and power down the node with
the operating system.
2. Remove the power cord from the rear of the node as described on page 6-3.
3. Press the release tab on the bottom of the fan and pull it away from rear of
the node.
Installing a Rear Exhaust Fan
1. Press the release tab on the bottom of the fan and insert it into the open fan
bay.
2. Push the fan into the bay until it clicks into the locked position.
Figure 6-19: Installing the External Fan
6-19
Chapter 6: Advanced Chassis Setup
Advertisement
Table of Contents
