Chapter 3 Tutorials
3.2.2 Wireless LAN Configuration Overview
The following figure shows the steps you should take to configure the wireless
settings according to the operating mode you select. Use the Web Configurator to
set up your NWA's wireless network (see your Quick Start Guide for information
on setting up your NWA and accessing the Web Configurator).
Figure 14 Configuring Wireless LAN
Access Point
Mode.
Select 802.11
Mode and
Channel ID.
Select SSID
Profile.
Configure SSID Profile.
Edit Security Profile.
Configure RADIUS
authentication (optional).
Configure internal AUTH.
SERVER (optional).
Configure Layer 2
Isolation (optional).
Configure MAC Filter
(optional).
36
Select Operating Mode.
Bridge /
Repeater Mode.
Select 802.11
Select 802.11 Mode
Mode and
and Channel ID.
Channel ID.
Configure
Configure WDS Security.
WDS Security.
Select SSID Profile.
Edit Security Profile.
Configure RADIUS
authentication (optional).
Configure internal AUTH.
SERVER (optional).
Configure Layer 2
Isolation (optional).
Configure MAC Filter
(optional).
Check your settings and test.
AP + Bridge
Mode.
Select 802.11
Mode and
Channel ID.
Configure each
SSID Profile.
Configure
Configure each
SSID Profile.
Security Profile.
Configure RADIUS
authentication
(optional).
Configure internal
AUTH. SERVER
(optional).
Configure Layer 2
Isolation (optional).
Configure MAC Filter
(optional).
NWA-3160 Series User's Guide
MBSSID
Mode.
Select SSID
.
Profiles