Ricoh D069 Field Service Manual page 460

7. Appendix: Fax Service Program (Only For D068/D069)
No
The available memory threshold,
below which ringing detection (and
0-7
therefore reception into memory) is
disabled
Communication Switch 0E [SP No. 1-104-015]
No
Minimum interval between
0-7
automatic dialing attempts
7
Communication Switch 0F – Not used (do not change the settings.)
Communication Switch 10 [SP No. 1-104-017]
No
Memory transmission: Maximum
0-7 number of dialing attempts to the
same destination
Communication Switch 11 – Not used (do not change the settings.)
Communication Switch 12 [SP No. 1-104-019]
No
Memory transmission: Interval
0-7 between dialing attempts to the
same destination
268
FUNCTION
FUNCTION
FUNCTION
FUNCTION
COMMENTS
00 to FF (Hex), unit = 4 kbytes
(e.g., 06(H) = 24 kbytes)
One page is about 24 kbytes.
The machine refers to this setting before each fax reception.
If the amount of remaining memory is below this threshold,
the machine cannot receive any fax messages.
If this setting is kept at 0, the machine will detect ringing
signals and go into receive mode even if there is no memory
available. This will result in communication failure.
COMMENTS
06 to FF (Hex), unit = 2 s
(e.g., 06(H) = 12 s)
This value is the minimum time that the machine waits before
it dials the next destination.
COMMENTS
01 – FE (Hex) times
COMMENTS
01 – FF (Hex) minutes