Ricoh D069 Field Service Manual page 332

5. Appendix: SP Mode Tables
Resets the SC, paper, original, and total jam counters. When the program ends normally,
001 the message "Completed" is displayed. SP7-807-1 does not reset the following logs:
SP7-507 (Display-Paper Jam History) and SP7-508 (Display-Original Jam History).
MF Error Counter Japan Only
7826
Displays the number of counts requested of the card/key counter.
001 Error Total
002 Error Staple
MF Error Counter Clear
5
7827
Press Execute to reset to 0 the values of SP7826. Japan Only
7832* Display-Self-Diag
Displays the SC codes and the number of their occurrences. Each number is in the range
001
of 0 to 9999.
[Resident Memory]
7836
Displays the contents of the memory on the controller board.
Assert Info
7901
Records the location where a problem is detected in the program. The data stored in this
SP is used for problem analysis. DFU
001 File Name
002 Number of Lines
003 Location
Dsply–Info Count
7991*
Displays the total operating time or the total number of operations. The time is displayed in
the following format: day: hour: minute: second.
140
A request for the count total failed at power on. This error will
occur if the device is installed but disconnected.
The request for a staple count failed at power on. This error
will occur if the device is installed but disconnected.
- -
- -
- -