Dataoverwritesecurity Unit Type I (D362) - Ricoh D069 Field Service Manual

1. Remove the screw [A] on the controller board.
2. Install the HDD unit [B] in the controller board ( x 3).
• The screw [A] is used in this step.
3. Reinstall the controller board in the machine.
After Installing the HDD
1. Do SP5832-001 to format the hard disk.
2. Do SP5853-001 to copy the preset stamp data from the firmware to the hard disk.
3. Do SP5846-040 to copy the address book to the hard disk from the controller board.
4. Do SP5846-041 to let the user get access to the address book.
5. Turn the main power switch off/on.

DataOverwriteSecurity Unit Type I (D362)

Before You Begin the Procedure
1. Confirm that the DataOverwriteSecurity unit SD card is the correct type for the machine. The correct
type for this machine is "Type I".
2. Make sure that the following settings are not at their factory default values:
• Supervisor login password
Controller Options
2
81