Printer Service Program Mode Table - Ricoh D069 Field Service Manual

• These motors may not respond when the fusing temperature is high.
• Selecting "ON" checks that one of these motors normally operates. Selecting "OFF" turns off the
motor that you have started by selecting "ON." However, this does not guarantee that the motor
normally stops during normal operation.

Printer Service Program Mode Table

SP No. Description
1003 Clear Setting
1005 Display Version
1006 Sample/Locked print
Scanner Program Mode Table
Service Table Key
Notation
Example: [-9 to +9 / +3.0 / 0.1 mm step]. The setting can be adjusted in the
[range / default /
range ±9, value reset to +3.0 after an NVRAM reset, and the value can be
step]
changed in 0.1 mm steps with each key press.
italics Comments added for your reference.
This value is stored in NVRAM. After a RAM reset, the default value (factory
*
setting) is restored.
DFU Denotes "Design or Factory Use". Do not change this value.
SP1 Mode Number
Function and Setting
Not used
Displays the version of the controller firmware.
0: Link with Doc., 1: On
Enables and disables the document server. When you select "0"
the document server is enabled or disables in accordance with
copy service mode SP5-967. When you select "1" the document
server is enabled regardless of service mode SP5-967.
What it means
System Service Mode (Basic: D067/D072)
Function and [Setting]
5
203