Lens Block; Exposure Lamp, Lamp Stabilizer Board - Ricoh D069 Field Service Manual

Lens Block

• Do not disassemble the lens block. The lens block is precision adjusted before shipment.
• Do not touch the screws on the CCD. The CCD is precision adjusted before shipment.
1. Exposure glass ( "Exposure Glass")
2. Front left cover, operation panel (
3. Release the cable from the four clamps [A].
4. Lens block [B] ( x 4, 1 flat cable)
• Do not loosen the paint-locked screws holding the lens unit in place.
• After installing a new lens block, carry out copy adjustments (

Exposure Lamp, Lamp Stabilizer Board

Do not fold the exposure cable on the exposure lamp.
"Operation Panel and Upper Covers")
Scanner Unit
"Adjusting Copy Image Area").
4
99