7. Appendix: Fax Service Program (Only For D068/D069)
Bit Switches
This section is used only for F/SPF models (D068/D069).
• Do not adjust a bit switch or use a setting that is described as "Not used", as this may cause the
machine to malfunction or to operate in a manner that is not accepted by local regulations. Such bits
are for use only in other areas, such as Japan.
• Default settings for bit switches are not listed in this manual. Refer to the System Parameter List printed
by the machine.
System Switches
System Switch 00 [SP No. 1-101-001]
No
7
Dedicated transmission parameter
programming
0
0: Disabled, 1: Enabled
1
Not used
242
FUNCTION
COMMENTS
Set this bit to 1 before changing any dedicated transmission
parameters.
Reset this bit to 0 after programming dedicated transmission
parameters.
Do not change