4. Replacement and Adjustment
4
1. Exposure glass (
2. Front left cover, operation panel (
3. Slide the first scanner to a position where the lamp and scanner are clear of the metal lids.
4. Disconnect the lamp connector [A].
5. Remove either or both of the following:
• Exposure lamp [B] ( x 1)
• Lamp stabilizer board [C] ( x 2, 1 flat cable)
Scanner Motor
1. Rear cover (
2. Rear scale, upper right cover (
100
"Exposure Glass")
"Operation Panel and Upper Covers")
"Rear Cover")
"Operation Panel and Upper Covers")