Smc Print (Sp5-990); Id Sensor Error Analysis (Sp2-221) - Ricoh D069 Field Service Manual

Serial Number and NVRAM
Serial numbers are stored in the NVRAM before shipment and are not cleared. You must specify a serial
number after you replace the NVRAM.

SMC Print (SP5-990)

SP5-990 outputs machine status lists.
1. Select SP5-990.
2. Select a menu:
• GW machine: 001 All (Data List), 002 SP (Mode Data List), 003 User Program, 004 Logging
Data, 005 Diagnostic Report, 006 Non-Default, 007 NIB Summary, 008 Net File Log, 021
Copier User Program, 022 Scanner SP, 023 Scanner User Program, 040 Parts Alarm Counter
Print, 064 Normal Count Print, 065 User Code Counter, 066 Key Operator Counter, 067
Contact List Print, 069 Heading1 print, 071 Heading3 print, 072 Group List Print, 128 ACC
Pattern, 129 User Color Pattern, or 160:ACC Pattern Scan
• The output given by the menu "Big Font" is suitable for faxing.
3. Press the "Execute" key.
• GW machine: The machine status list is output.
4. To return to the SP mode, press the

ID Sensor Error Analysis (SP2-221)

The image quality may become very bad when the ID sensor does not operate properly. However, there
is no such SC code that indicates ID-sensor malfunction; instead, SP2-221 shows you some information
on the ID sensor. Check this information when the image quality is not very good.
The table lists the information shown with SP2-221 (ID Sensor Error Analysis).
SP
SP2-221-1 Vsg Vsg < 2.5V or
(VG in the display) (Vsg – Vsp) < 1.00V
SP2-221-2 Vsp Vsp > 2.5V or
(VP in the display) (Vsg – Vsp) < 1.00V
key.
Error condition
• ID sensor defective
• ID sensor dirty
• Drum not charged
• Toner density very low
• ID sensor pattern not
Using SP Mode (F/SPF: D068/D069)
Possible cause
created
6
Remarks
-
-
177