Scanner Program Mode Table - Ricoh D069 Field Service Manual

5. Appendix: SP Mode Tables
SP Modes Related to Printer Controller
The following SP modes are located in the copier SP mode. Refer to section 5.1 of the main unit service
manual.
SP No.
5801 Memory All Clear
5907 Plug & Play
Detailed Display of
7832
Self-Diagnostics
5

Scanner Program Mode Table

Service Table Key
Notation
[range / default /
step]
italics
*
DFU
SP1
1001* 5
170
Description
Resets data for process control and all software counters, and
returns all modes and adjustments to their defaults values.
Section "Memory Clear" in this chapter for details.
Selects the brand name and the production name for Windows
Plug & Play. This information is stored in NVRAM.
Displays the controller self-diagnostic result.
Example: [-9 to +9 / +3.0 / 0.1 mm step]. The setting can be adjusted in the
range ±9, value reset to +3.0 after an NVRAM reset, and the value can be
changed in 0.1 mm steps with each key press.
Comments added for your reference.
This value is stored in NVRAM. After a RAM reset, the default value (factory
setting) is restored.
Denotes "Design or Factory Use". Do not change this value.
Mode Number
Scan NV Version
Function and Setting
What it means
Function and [Setting]
Displays the scanner NV version.
This shows as following: Function name _ Model name
_ Version