List Of Warning Codes - Panasonic LB-DH8 series Operator's Manual

Others
Email
Code
notification
E3031
±
E3040
±

List of warning codes

Email
Code
notification
W1000
±
W1001
±
W1002
±
W1010
±
W1020
±
W1030
s
Errors and warnings
SNMP trap
notification
Failed recording due to multiple factors of the drive system and a
magazine. Recording to the magazine is disabled.
±
)Check if any problems with the drive system and the magazine
have been detected in the log. If a problem has been detected,
follow the solution for the corresponding error or warning code.
Failed read operation in the drive system. There is an abnormality
in the media in the magazine or a failure of the drive or peripheral
circuits of the drive.
±
)Try another magazine. If the system detects the same error, it
needs to be repaired.
)For information on the conditions that cause the error, refer to
"RAID functions" ( 103).
SNMP trap
notification
A fault has been detected in the external power supply. The
redundancy of the external power supply has decreased.
±
)Replace the external power supply with reference to the manual
for the external power supply in use.
A fault has been detected in the normal fan on the back of the unit
or the peripheral circuit of the fan. The operation has been switched
±
to the redundant fan.
It needs to be repaired.
A fault has been detected in the redundant fan on the back of the
unit or the peripheral circuit of the redundant fan.
±
If the internal temperature is normal, operations will continue.
It needs to be repaired.
The software update has failed.
±
)Refer "Software problems" ( 122) to take proper action.
An abnormality has been detected in the panel or the peripheral
circuit of the panel.
±
)Turn the unit off and back on.
If the problem persist, contact your support service provider.
( 138)
Email submission to the SMTP server has failed.
±
)Check if the network setting for the SMTP server is correct.
)Refer "Network" ( 125) to take proper action.
132
Action to be taken
Action to be taken