Table of Contents
Advertisement
Operations
Operating the control panel
Login onto the control panel
≥ When using the "Monitor", "Config", and "Manage" menus on the control panel, input a password for login.
≥ When using the unit for the first time after installation, log in onto the control panel and change a password.
≥ Logout is performed automatically 1 hour after login is performed.
≥ For logout, select "Manage" "Enable Password Lock" in order.
Note
≥ The control panel will log out automatically after 1 hour.
≥ The "Status" menu can be confirmed without login.
≥ The "Service" menu cannot be used. The menu is for maintenance.
≥ Logging into the Web interface is not possible while the user is logged into the control panel.
Logging into the control panel while the user is logged into the Web interface will cause a logout from the Web
interface.
Basic operation
Touch the control panel and select an item for operation.
Do not touch two or more items at the same time.
Touching the item causes a beep to allow for screen switching, setting, or processing in response to the selected
item.
Menu screen
Menu tab
A
Setup item
B
Select the desired tab to change the setup items (B).
Select a menu item to proceed to its setup screen. ( 35)
28
Advertisement
Table of Contents
