Table of Contents
Advertisement
Operations
Makes the settings for IPv6.
≥ The settings can be made only when "IP Stack" has been set to "IPv6" or "IPv4+6".
Stateless Auto Config
DHCP
IPv6
IPv6 Address (Static)*
Gateway*
Prefix Length*
* The settings can be made when "DHCP" has been set to "Off".
Operating the control panel
Sets a stateless auto configuration.
On: Enables a stateless auto configuration.
Off: Disables a stateless auto configuration.
≥ The initial setting is "Off".
Sets DHCP.
On: Enables DHCP.
Off: Disables DHCP.
≥ The initial setting is "Off".
Sets an IPv6 address.
≥ Inputs the address in hexadecimals.
Sets a gateway address.
≥ Inputs the address in hexadecimals.
Sets an IP address prefix length.
≥ Inputs a decimal number from 0 to 128.
≥ The initial setting is "0".
65
Advertisement
Table of Contents
