Operations
"LAN1", "LAN2"
Indicates the common settings for the protocol stack.
IP Stack
Common
MAC Address
Speed
Indicates the settings for IPv4.
≥ The settings are indicated only when "IP Stack" has been set to "IPv4" or "IPv4+6".
DHCP
IPv4
Address*
Netmask*
Gateway*
Indicates the settings for IPv6.
≥ The settings are indicated only when "IP Stack" has been set to "IPv6" or "IPv4+6".
Stateless Auto Configuration
DHCP
Address(Link Local)
IPv6
Address(Static Assigned)*
Address(Router Discovery)
Gateway*
Prefix Length*
The setting is indicated when "DHCP" has been set to "Off".
*1
*2
Indicates a value acquired by DHCP when "DHCP" has been set to "On".
Web interface operation
Indicates IP stack information.
≥ "Unknown" indicates that no setting has been selected.
(Neither IPv4 nor IPv6 are available.)
Indicates the MAC address.
Indicates the LAN link speed.
Indicates the setting for DHCP.
1, 2
Indicates the IPv4 address.
Indicates the netmask address.
1, 2
Indicates the gateway address.
1, 2
Indicates the setting for stateless auto configuration.
Indicates the setting for DHCP.
Indicates the link local IPv6 address. A value generated
from the MAC address and other information is indicated.
1
Indicates the static IPv6 address.
Indicates the router IPv6 address.
≥ When "Stateless Auto Configuration" is enabled, a value
acquired from stateless auto configuration is indicated.
1
Indicates the gateway address.
1
Indicates the setting for the IP address prefix length.
80