Table of Contents
Advertisement
Introduction
Control Unit (LB-XC82)_Rear panel
Control interface port
A
Nameplate
B
Handle
C
Writer Unit (LB-XD82)_Rear panel
Power connector
A
Control interface port
B
Component names
Serves as ports for a connection to the Base Module via the supplied
exclusive use connection cable.
Describes a product number, serial number, etc.
Use this part to remove the Control unit from the Extension Unit.
≥ Do not use this part for any purpose other than the above, such as
lifting this unit by holding this part.
Provides a +24 V DC power supply.
≥ Before disconnecting a power cable, confirm that LED 5
(POWER) listed in the following field E is off.
Serves as ports for a connection to the Base Module via the
supplied exclusive use connection cable.
14
Advertisement
Table of Contents
