Table of Contents
Advertisement
Introduction
Mounting a magazine on a magazine drawer
Preparation
≥ Attach a user label onto a magazine. ( 17)
≥ Confirm that the write disable switch of the magazine is in position. ( 17)
Mount a magazine on a magazine drawer.
1
≥ Insert the magazine in the direction of the arrow with the "
≥ After inserting a magazine into a magazine drawer, confirm that it cannot be pulled out.
≥ If the bottom magazine drawer on the both side is placed horizontally, it may be damaged.
Mount the magazine drawer into the Base Module or the Extension Unit.
2
≥ Insert the part with the bend on the side of the magazine drawer into the guide rails on the side of the chassis
of the Base Module or Extension Unit, and push it all the way inside until it locks. The unit does not work
unless the magazine drawer is pushed to the end.
≥ Make sure that the direction of the magazine drawer is inserted correctly.
≥ After the magazine drawer has been pushed in, inventory is executed to acquire the magazine information
and the changer unit operates.
Guide rails on the chassis side
Handling a magazine and magazine drawer
Part with the bend on the side of the
25
" side facing upward.
magazine drawer
Advertisement
Table of Contents
