Table of Contents
Advertisement
Others
Errors and warnings
If an error or warning situation arises during operation of the unit, the information LED illuminates in red on the front
of the unit, a pop-up message is displayed on the control panel, and then logging takes place.
In addition, an email or SNMP trap notification is issued in response to the contents of the error or warning so long
as a setting for email notification or SNMP trap notification is made.
≥ If a warning arises, processing in progress is interrupted depending on the contents of the warning.
Action to be taken for an error or warning
If an error or warning situation arises, check the error code or warning code in "List of error codes" ( 130) or "List of
warning codes" ( 132) and take proper action in response to the error or warning. If the problem cannot be solved,
turn the unit off and then back on and retry the operation. (If turning off the unit does not take place, press and hold
the power button for 15 seconds or more to forcibly turn off the unit.)
When the problem cannot be solved even after the above action or the unit must be repaired, contact your support
service provider. ( 138)
Checking the error or warning code
An error or warning code with the unit can be known through the following:
` Control panel
` Web interface
` Email notification
` SNMP trap notification
` Log
Elements of error and warning codes
≥ An error in the magazine carrier unit is displayed as an error of Base Module (LB-DH80) regardless of the position
where the error occurred.
≥ When a code that is not included in the "List of error codes" ( 130) or the "List of warning codes" ( 132) is
displayed, please contact maintenance. ( 138)
e,g,.
E1234-A
Main code
Error
Subcode
E：
Warning
Ｗ ：
127
Module name
Advertisement
Table of Contents
